Hardware Setup-
Star TSP 600 (TSP643) for Macintosh
1) Connect printer cables and power supply.
Turn printer on and load paper.
2) To download the proper Mac Drivers for your Star Printer, go here:
http://www.starmicronics.com/Supports/Download.aspx
Scroll down to the section for the latest CUPS Mac Driver and download that file.
3. Run the installation for the print driver.
4. Set the Star Printer as your default printer.
5. At the bottom of any screen in Dharma Tribe, click on the square at the bottom (to the left of "browse". This will expand the window to the left. Once expanded, under "layout" select receipt l print
6. From the FILE command,
select page setup and select and save the following
settings (NOTE: The TSP 100 series printer will look very
similar to this):
Cash drawer firing.
1) Connect the peripheral cable provided with your cash drawer from the back of the cash drawer to the matching rear input on the back of your receipt printer. Upon printing, the cash drawer will fire.
